Power supply, redundancy and switching, low-current and communication infrastructure — designed and built as one system to a defined availability class, from medium voltage to the switch port.
See the scope
We prepare the design, build the installation and take on its maintenance. The client has one responsible counterpart instead of three, and the decisions made on paper reach the site the way they were intended.
Investment projects for buildings and production facilities — through every phase, from concept to site supervision.
We build what we have designed — or work to a third-party design when the project already has documentation.
Official BALTUR partner. We service industrial burners and pressure equipment.
Data centres, electrical installations, automation, switchboards and low-current systems for buildings and production facilities. Alongside them — boiler, gas and air systems, so you never need to hire several firms for one project.
Power installations, internal and external supply, transformer substations, lighting, lightning protection and earthing.
Process control, instrumentation, PLCs and SCADA.
Main distribution boards, control panels, reactive power compensation. Schematics, sizing, layout and specifications.
The full range of low-current systems — standalone or as part of the electrical design.
Building automation — lighting, heating, ventilation and access under one control.
Battery systems and their integration with photovoltaics and existing supply.
Boiler plants for steam generation, auxiliary systems and process interconnection.
Gas, oil and dual-fuel burners. Gas trains, safety controls, combustion tuning.
High-temperature heat transfer systems for production processes.
Internal and external gas pipelines, regulating and metering stations, burner units.
Tank and cylinder LPG installations for industrial and domestic use.
Detection of combustible and toxic gases, interlocked with ventilation and emergency shut-off.
Hydrogen systems and the safety measures that go with them.
ORC systems that turn unused process heat into electrical energy.
Heating and air-conditioning installations for buildings and production areas.
Supply and extract systems sized to the process and the workplace standards.
Capture and removal of dust, chips and process fumes at the point of origin.
Pipework for liquids, steam and compressed air in production conditions.
Since 2024, data centres with over 500 kW of installed IT power report their energy indicators annually to a European database. What exactly is measured, where the metering points go, and why adding them afterwards is expensive.
Read the articleUp to 10 kW per rack the question is airflow management. Above 30 kW air physically runs out. And AI workloads now ask for over 100 kW per rack — at which point the conversation moves from air conditioning to pipework.
Read the articleUPS autonomy is quoted at full load, with a new battery, at 25 °C. None of the three is true on the day the battery is needed. How to calculate the real time to generator pick-up.
Read the articleTwo supply paths, two UPS systems, two generators — and the whole facility stops on one breaker. How to read a redundancy diagram and where the points hide at which the two paths quietly become one.
Read the articleAn ordinary inverter follows the grid and stops when it disappears. A grid-forming one creates it. The difference decides whether a battery system is merely a saving on the bill or a standby supply for the whole site — and why that changes the protection.
Read the articleThe standard that changed how utilities build substations is arriving in the factory transformer station. What it brings, what it demands, and why the interlock between two breakers can now be a message on the network.
Read the articleA century after the first mechanical breakers, silicon carbide makes something new possible — interrupting a short-circuit current before it ever reaches its peak. What that gives protection, and what is still missing.
Read the articleThe most common insulating gas in medium-voltage switchgear can no longer be used in new equipment up to 24 kV. What the alternatives are, what they give up, and what the designer of a transformer substation needs to know.
Read the articleThe first article is published on Monday.
BALTUR is an Italian manufacturer of industrial burners with more than seventy years of history. The partnership means access to original parts, technical documentation and training — and that with us, a burner is tuned by the factory method, not by eye.
It is also an advantage at the design stage: we know the characteristics of the equipment we specify, because we install and service it.
Years of design experience of our specialists, gained on building and industrial projects.
Design, delivery and maintenance with one contractor. Less coordination for the client and less lost between stages.
Areas of competence — from electrical installations and automation to boiler and gas systems.
